- Jun 29, 2018 -

Mounting and operating instruction of F360 RCCB:

●Insllation in the desired position by snap-on fastening to Din-rails accordig to IEC 50 022, 35mm;

●The supply may be connected from above or below as required, care should be taken to ensure a good, secure connection to the conductor, maximum screw drive torque 3Nm;

●The F360 RCCB is switched On and Off by means of the blue switch handle;

●For the functional test, the switch must be in the On position and the white test pushbutton is pressed, the rccb must trip immediately jumps to the lower position with the switch position indicator "O", the functional test should be repeated monthly;